WNS 16swg Pittsburgh Lock Rollformer c/w Air Motor Conversion (RF16-AC)

Description

W. NEAL SERVICES LTD – Manufacturing Rollforming Machinery for over 30 years.

WNS 16swg (1.6mm) PNEUMATIC PITTSBURGH LOCK ROLLFORMERS are 7 station machines and are principally used in the HVAC industry for joining sheet metal at right angles on straight and curved duct sections. Pittsburgh Lock rolls and auxiliary shafts are fitted as standard with the option of a flanging attachment if required. The ‘lock’ is formed in one pass and a flange is inserted into the pocket. The edge is hammered over manually or with a WNS PITTSBURGH LOCK SEAM CLOSER/LOCKER (SC10) & (SC12) or a WNS PITTSBURGH LOCK AIR CLOSING HAMMER (AH18). Additional forming rolls, such as double seam rolls, drive cleat rolls, etc. can be fitted onto the auxiliary shafts. This enables a right angle to be formed on curved, straight and irregular shapes. The attachment is fitted with a tilting head to enable complete circles to be formed.

This machine is fitted with a quality gast air motor, pneumatic control circuit and emergency stop button. Ideal for use where electric circuits are not permitted such as on and off shore chemical and petroleum installations.

WNS Rollformers are manufactured with all steel side plates. The shafts, forming rolls, gears and guide fences are all hardened, and needle bearings are fitted throughout.

Please note: Flanging Attachment shown in the photographs is an optional extra and not included as standard.

Additional Auxiliary Rolls Available:
• Small Pittsburgh Lock (APL)
• Double Seam
• Drive Cleat
• Plain Seam
• Right Angle Flange
• Standing Seam
• 3 in 1 Rolls
• Safe Edge
• Closed Double Seam

View Literature

Additional information

Weight	1250 kg
Dimensions	160 x 72 x 130 cm

SPECIFICATIONS – GENERAL
Model:	RF16-PN
Stations:	7 (with Auxiliary Shafts)
Maximum Thickness:	16swg (1.6mm) Mild Steel
Air Pressure:	90-120 PSI
Dimensions – machine (apx):	1450mm x 615mm x 1000mm (l x w x h)
Dimensions – packing (apx):	1570mm x 720mm x 1300mm (l x w x h)
Weights – net/gross (apx):	250Kg/310Kg

SPECIFICATIONS – PITTSBURGH (Fitted as Standard)
Maximum Thickness:	0.5mm – 1.6mm (26swg – 16swg) Mild Steel
Approximate Material Used:	32mm – subject to knock over edge
Seam Width:	13mm
Pocket Depth:	11mm

SPECIFICATIONS – FLANGING ATTACHMENT (Optional Extra)
Maximum Thickness:	16swg (1.6mm) Mild Steel
Minimum Corner Radius:	50mm
Flanging Attachment Direction:	Left to Right

SPECIFICATIONS – SMALL PITTSBURGH (Optional Auxiliary Rolls)
Maximum Thickness:	22swg (0.8mm) Mild Steel
Approximate Material Used:	25mm
Seam Width:	10mm

SPECIFICATIONS – DOUBLE SEAM (Optional Auxiliary Rolls)
Maximum Thickness:	18swg (1.2mm) Mild Steel
Approximate Material Used:	32mm
Seam Width:	13mm

SPECIFICATIONS – DRIVE CLEAT (Optional Auxiliary Rolls)
Maximum Thickness:	20swg (1.0mm) Mild Steel
Approximate Material Used:	54mm
Seam Width:	29mm

SPECIFICATIONS – PLAIN SEAM (Optional Auxiliary Rolls)
Maximum Thickness:	20swg (1.0mm) Mild Steel
Approximate Material Used:	11mm
Seam Width:	10mm

SPECIFICATIONS – RIGHT ANGLE FLANGE (Optional Auxiliary Rolls)
Maximum Thickness:	16swg (1.6mm) Mild Steel
Approximate Material Used:	11mm
Seam Width:	–

SPECIFICATIONS – STANDING SEAM (Optional Auxiliary Rolls)
Maximum Thickness:	22swg (0.8mm) Mild Steel
Approximate Material Used:	54mm
Seam Width:	–

SPECIFICATIONS – 3 in 1 (Optional Auxiliary Rolls)
Maximum Thickness:	22swg (0.8mm) Mild Steel
Approximate Material Used:	–
Seam Width:	–

SPECIFICATIONS – SAFE EDGE (Optional Auxiliary Rolls)
Maximum Thickness:	22swg (0.8mm) Mild Steel
Approximate Material Used:	–
Seam Width:	8.0mm

SPECIFICATIONS – CLOSED DOUBLE SEAM (Optional Auxiliary Rolls)
Maximum Thickness:	18swg (1.2mm) Mild Steel
Approximate Material Used:	32mm
Seam Width:	13mm

All capacities are based on the use of Rollforming quality Mild Steel. All specifications, dimensions & weights are approximate & are to be used as a guide. Colours may vary. Please note photographs/drawings are not to scale. All prices are subject to delivery costs and applicable VAT. W. Neal Services Ltd reserves the right to alter any specifications. *For warranty terms please see our full Terms & Conditions. E&OE.