If you’re not sure this machine will do the job you need it for or you simply have questions about it, we can help. Call or email us using the buttons below:
MACHINERY WANTED CHAT TO US ON 01702 542558 OR UPLOAD A PHOTO OF YOUR MACHINE(S) BY CLICKING HERE.
W. NEAL SERVICES LTD – Manufacturing Rollforming Machinery since 1981.
WNS 16swg (1.6mm) PITTSBURGH LOCK ROLLFORMERS are 7 station machines and are principally used in the HVAC industry for joining sheet metal at right angles on straight and curved duct sections. Pittsburgh Lock rolls and auxiliary shafts are fitted as standard with the option of a flanging attachment if required. The ‘lock’ is formed in one pass and a flange is inserted into the pocket. The edge is then hammered over either manually or with a WNS PITTSBURGH LOCK SEAM CLOSER / LOCKER (SC12) or with a WNS 18swg (1.2mm) PITTSBURGH LOCK AIR CLOSING HAMMER (AH18). Additional forming rolls, such as double seam rolls, drive cleat rolls, etc. can be fitted onto the auxiliary shafts. A flanging attachment is also available and can be fitted as an optional extra. This enables a right angle to be formed on curved, straight and irregular shapes. The attachment is fitted with a tilting head to enable complete circles to be formed.
WNS Rollformers are manufactured with all steel side plates. The shafts, forming rolls, gears and guide fences are all hardened, and needle bearings are fitted throughout.
Please note: Flanging attachment shown in the detailed photographs and video is an optional extra and not included as standard.
Additional Auxiliary Rolls Available:
• Small Pittsburgh Lock (APL)
• Double Seam
• Drive Cleat
• Plain Seam
• Right Angle Flange
• Standing Seam
• 3 in 1 Rolls
• Safe Edge
• Closed Double Seam
| Weight | 1250 kg |
|---|---|
| Dimensions | 160 × 72 × 130 cm |
| SPECIFICATIONS – GENERAL | |
| Model: | RF16 |
| Stations: | 7 (with Auxiliary Shafts) |
| Maximum Thickness: | 16swg (1.6mm) Mild Steel |
| Speed: | 6.0m/min |
| Motor Power: | 2HP, 1.5kW |
| Supply Voltage: | 415v, 3 Phase |
| Dimensions – machine (apx): | 1450mm x 615mm x 1000mm (l x w x h) |
| Dimensions – packing (apx): | 1570mm x 720mm x 1300mm (l x w x h) |
| Weights – net/gross (apx): |
250Kg/310Kg |
| SPECIFICATIONS – PITTSBURGH (Fitted as Standard) |
|
| Maximum Thickness: | 26swg – 16swg (0.5mm – 1.6mm) Mild Steel |
| Approximate Material Used: | 32mm – subject to knock over edge |
| Seam Width: | 13mm |
| Pocket Depth: | 11mm |
| SPECIFICATIONS – FLANGING ATTACHMENT (Optional Extra) |
|
| Maximum Thickness: | 16swg (1.6mm) Mild Steel |
| Minimum Corner Radius: | 50mm |
| Flanging Attachment Direction: | Left to Right |
| SPECIFICATIONS – SMALL PITTSBURGH (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 22swg (0.8mm) Mild Steel |
| Approximate Material Used: | 25mm |
| Seam Width: | 10mm |
| Pocket Depth: | 8.5mm |
| SPECIFICATIONS – DOUBLE SEAM (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 18swg (1.2mm) Mild Steel |
| Approximate Material Used: | 32mm |
| Seam Width: | 13mm |
| SPECIFICATIONS – DRIVE CLEAT (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 20swg (1.0mm) Mild Steel |
| Approximate Material Used: | 54mm |
| Seam Width: | 29mm |
| SPECIFICATIONS – PLAIN SEAM (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 20swg (1.0mm) Mild Steel |
| Approximate Material Used: | 11mm |
| Seam Width: | 10mm |
| SPECIFICATIONS – RIGHT ANGLE FLANGE (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 16swg (1.6mm) Mild Steel |
| Approximate Material Used: | 11mm |
| Seam Width: | – |
| SPECIFICATIONS – STANDING SEAM (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 22swg (0.8mm) Mild Steel |
| Approximate Material Used: | 54mm |
| Seam Width: | – |
| SPECIFICATIONS – 3 in 1 (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 22swg (0.8mm) Mild Steel |
| Approximate Material Used: | – |
| Seam Width: | – |
| SPECIFICATIONS – SAFE EDGE (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 22swg (0.8mm) Mild Steel |
| Approximate Material Used: | – |
| Seam Width: | 8.0mm |
| SPECIFICATIONS – CLOSED DOUBLE SEAM (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 18swg (1.2mm) Mild Steel |
| Approximate Material Used: | 32mm |
| Seam Width: | 13mm |
All capacities are based on the use of rollforming quality mild steel unless otherwise stated. All specifications, dimensions & weights are approximate & are to be used as a guide. Colours may vary. Please note photographs/drawings are not to scale. All prices are subject to delivery costs and applicable VAT. W. Neal Services Ltd reserves the right to alter any specifications. *For warranty terms please see our full Terms & Conditions. E&OE.
If you’re not sure this machine will do the job you need it for or you simply have questions about it, we can help. Call or email us using the buttons below:
Give us a call today and we can help get you the machine you need.
Give us a call today and we can help get you the machine you need.
