WNS TUBE/PIPE NOTCHER (TN2B) is used to notch Round Tube and Pipe up to a maximum wall thickness of 2”. Constructed from an all steel frame, this Notcher can be mounted to any worktable, particularily suited to drill press tables. Designed to be powered with a drill press or hand drill and compatible with all standard hole saws up to 3” (Hole saw and drill not included).
Please note, for packing reasons this Tube Notcher is sent compacted and therefore the U-bracket and shaft are upside down – this is not a machine fault!!
Simply follow the below…
1). Unscrew the screw underneath.
2). Rotate the U-bracket upwards.
3). Replace & tighten the screw.
1). Remove the pin in the side block.
2). Turn the shaft the opposite way.
3). Re-insert the pin.
Volia! ….Still stuck?…. just ask!