If you’re not sure this machine will do the job you need it for or you simply have questions about it, we can help. Call or email us using the buttons below:
WNS PUNCH AND FLARE DIES (PFD-SET13) can create a smooth hole, with or without a flare in one easy step. Simply drill a pilot hole for the draw bolt, then apply the tool and tighten the bolt. The set is complete with 13 dies: 1/2″, 5/8″, 3/4″, 1″, 1 1/4″, 1 1/2″, 1 5/8″, 1 3/4″, 2″, 2 1/4″, 2 1/2″, 2 3/4″ & 3″.
| Weight | 20 kg |
|---|
| SPECIFICATIONS |
|||
| Model: | PFD-SET13 |
||
| Capacity: | 1.5mm Mild Steel |
||
| Sizes Included in the Set: |
1/2″ | 5/8″ | 3/4″ |
| 1″ | 1 1/4″ | 1 1/2″ | |
| 1 5/8″ | 1 3/4″ | 2″ | |
| 2 1/4″ | 2 1/2″ | 2 3/4″ | |
| 3″ | |||
| Finish Hole Diameter (apx): | + 1/8″ |
||
| Flare Height (apx): | 1/4″ |
||
| Packing – Dimensions (apx): | 300mm x 300mm x 80mm |
||
| Weights – net/gross (apx): | 18.5Kg/19.5Kg |
||
All capacities are based on the use of rollforming quality mild steel unless otherwise stated. All specifications, dimensions & weights are approximate & are to be used as a guide. Colours may vary. Please note photographs/drawings are not to scale. All prices are subject to delivery costs and applicable VAT. W. Neal Services Ltd reserves the right to alter any specifications. *For warranty terms please see our full Terms & Conditions. E&OE.
If you’re not sure this machine will do the job you need it for or you simply have questions about it, we can help. Call or email us using the buttons below:
Give us a call today and we can help get you the machine you need.
Give us a call today and we can help get you the machine you need.
