£25.00 – £65.00
If you’re not sure this machine will do the job you need it for or you simply have questions about it, we can help. Call or email us using the buttons below:
*fees apply
WNS Punch and Flare Dies (PF-DIES) can create a smooth hole, with or without a flare, in one easy step. Simply drill a pilot hole for the draw bolt, position the tool on the pilot hole, and tighten the bolt. Commonly used in automotive fabrication, providing both strength and aesthetical appeal. The following sizes are available to choose from: 1/2″, 5/8″, 3/4″, 1″, 1 1/4″, 1 1/2″, 1 5/8″, 1 3/4″, 2″, 2 1/4″, 2 1/2″, 2 3/4″ and 3″.
| Weight | 3 kg |
|---|
| SPECIFICATIONS | |||||||||
| Model: | PFD- DIES | ||||||||
| Maximum Thickness: | 1.5mm Capacity Mild Steel | ||||||||
| Die Details: | Inside Diameter/Hole Size: | 1/2″ | 5/8″ | 3/4″ | 1″ | 1 1/4″ | |||
| Outside Diameter of Die: | 1″ | 1 1/8″ | 1 1/4″ | 1 1/2″ | 1 3/4″ | ||||
| Inside Diameter/Hole Size: | 1 1/2″ | 1 5/8″ | 1 3/4″ | 2″ | 2 1/4″ | ||||
| Outside Diameter of Die: | 2″ | 2 1/8″ | 2 1/4″ | 2 1/2″ | 2 3/4″ | ||||
| Inside Diameter/Hole Size: | 2 1/2″ | 2 3/4″ | 3″ | ||||||
| Outside Diameter of Die: | 3″ | 3 1/4″ | 3 1/2″ | ||||||
| Flare Height (apx): | 1/4″ | ||||||||
| Dimensions – packing (apx): | 170mm x 150mm x 70mm (l x h x w) | ||||||||
All specifications, dimensions and weights are approximate and are to be used as a guide. Colours may vary. Please note photographs/drawings are not to scale. All prices are subject to delivery costs and applicable VAT.
W. Neal Services Ltd reserves the right to alter any specifications. For warranty terms please see our full Terms & Conditions. E&OE
If you’re not sure this machine will do the job you need it for or you simply have questions about it, we can help. Call or email us using the buttons below:
Give us a call today and we can help get you the machine you need.
Give us a call today and we can help get you the machine you need.
