If you’re not sure this machine will do the job you need it for or you simply have questions about it, we can help. Call or email us using the buttons below:
WNS PNEUMATIC PLANISHING HAMMER (PH305) is used for shaping sheet metal by hammering against a shaped surface. Pneumatic Hammers vastly speed up the process by striking thousands of blows per minute. Planishing is a process used in auto body repair and sheet metal craft work such as medieval armour production. This hammer comes complete with 10 dies, one die holder and stand.
| Weight | 35 kg |
|---|
| SPECIFICATIONS |
||
| Model: | PH305 |
|
| Throat Depth: | 305mm |
|
| Maximum Thickness: | 1.2mm Mild Steel |
|
| Top Die: | 1 |
|
| Lower Dies (x 10): |
3/4″ Radius | 1 1/2″ Radius |
| 2″ Radius | 3″ Radius | |
| 4″ Radius | 6″ Radius | |
| 8″ Radius | 12″ Radius | |
| Flat | Stretcher | |
| Hammer Speed: | 1800 – 4600 BPM |
|
| Air Pressure: | 90 – 120 PSI |
|
| Air Supply: | 8.8 CFM |
|
| Head Opening: | 20mm |
|
| Dimensions – machine (apx): | 600mm x 500mm x 1200mm (l x w x h) |
|
| Dimensions – packing (apx): | 720mm x 560mm x 310mm (l x w x h) |
|
| Weights – net/gross (apx): | 31Kg/35Kg |
|
All capacities are based on the use of rollforming quality mild steel unless otherwise stated. All specifications, dimensions & weights are approximate & are to be used as a guide. Colours may vary. Please note photographs/drawings are not to scale. All prices are subject to delivery costs and applicable VAT. W. Neal Services Ltd reserves the right to alter any specifications. *For warranty terms please see our full Terms & Conditions. E&OE.
If you’re not sure this machine will do the job you need it for or you simply have questions about it, we can help. Call or email us using the buttons below:
Give us a call today and we can help get you the machine you need.
Give us a call today and we can help get you the machine you need.
