If you’re not sure this machine will do the job you need it for or you simply have questions about it, we can help. Call or email us using the buttons below:
MACHINERY WANTED CHAT TO US ON 01702 542558 OR UPLOAD A PHOTO OF YOUR MACHINE(S) BY CLICKING HERE.
Please note this video is of a new WNS 16swg Rollformer.
Used/Reconditioned.
WNS 16swg (1.6mm) PITTSBURGH LOCK ROLLFORMER is a 7 station machine and is principally used in the HVAC industry for joining sheet metal at right angles on straight and curved duct sections. This machine comes complete with Pittsburgh Lock Rolls, Double Seam Rolls and Flanging Attachment. This machine has 415v, 3 phase electrics. (Ref:294)
This machine is now sold.
W. NEAL SERVICES LTD – Manufacturing Rollforming Machinery for over 30 years.
Rollformers create a ‘lock’ which is formed in one pass and a flange is inserted into the pocket. The edge is then hammered over either manually or with a WNS PITTSBURGH LOCK SEAM CLOSER / LOCKER (SC10) & (SC12) or with a WNS 18swg (1.2mm) PITTSBURGH LOCK AIR CLOSING HAMMER (AH18). Additional forming rolls, such as double seam rolls, drive cleat rolls, etc. can be fitted onto the auxiliary shafts. The flanging attachment enables a right angle to be formed on curved, straight and irregular shapes. The attachment is fitted with a tilting head to enable complete circles to be formed.
WNS Rollformers are manufactured with all steel side plates. The shafts, forming rolls, gears and guide fences are all hardened, and needle bearings are fitted throughout.
Additional Auxiliary Rolls Available:
• Small Pittsburgh Lock (APL)
• Double Seam
• Drive Cleat
• Plain Seam
• Right Angle Flange
• Standing Seam
• 3 in 1 Rolls
• Safe Edge
• Closed Double Seam
| SPECIFICATIONS – GENERAL | |
| Model: | Ref: 294 |
| Stations: | 7 (with Auxiliary Shafts) |
| Maximum Thickness: | 16swg (1.6mm) Mild Steel |
| Speed: | 6.0m/min |
| Motor Power: | 2HP, 1.5kW |
| Supply Voltage: | 415v, 3 Phase |
| Dimensions – machine (apx): | 1450mm x 615mm x 1000mm (l x w x h) |
| Weights – net/gross (apx): |
250Kg/310Kg |
| SPECIFICATIONS – PITTSBURGH LOCK ROLLS |
|
| Maximum Thickness: | 0.5mm – 1.6mm (26swg – 16swg) Mild Steel |
| Approximate Material Used: | 32mm – subject to knock over edge |
| Seam Width: | 13mm |
| Pocket Depth: | 11mm |
| SPECIFICATIONS – DOUBLE SEAM ROLLS |
|
| Maximum Thickness: | 18swg (1.2mm) Mild Steel |
| Approximate Material Used: | 32mm |
| Seam Width: | 13mm |
| SPECIFICATIONS – FLANGING ATTACHMENT |
|
| Maximum Thickness: | 16swg (1.6mm) Mild Steel |
| Minimum Corner Radius: | 50mm |
| Flanging Attachment Direction: | Left to Right |
All capacities are based on the use of Rollforming quality Mild Steel unless otherwise stated. All specifications, dimensions & weights are approximate & are to be used as a guide. Colours may vary. Please note photographs/drawings are not to scale. All prices are subject to delivery costs and applicable VAT. W. Neal Services Ltd reserves the right to alter any specifications. *For warranty terms please see our full Terms & Conditions. E&OE.
If you’re not sure this machine will do the job you need it for or you simply have questions about it, we can help. Call or email us using the buttons below:
Give us a call today and we can help get you the machine you need.
Give us a call today and we can help get you the machine you need.
