£800.00 – £880.00
If you’re not sure this machine will do the job you need it for or you simply have questions about it, we can help. Call or email us using the buttons below:
W. NEAL SERVICES LTD – Manufacturing Rollforming Machinery since 1981.
WNS forming rolls are suitable for most brands of Rollformers (Lockformer, Oliver, Shorte, Haigh, CMZ, Morgan Rushworth etc) and held in stock.
Rolls are suitable for most imperial size Rollformers, with a recommended shim size of 0.0080
Additional Auxiliary Rolls Available:
• Small Pittsburgh Lock (APL)
• Double Seam
• Drive Cleat
• Plain Seam
• Right Angle Flange
• Standing Seam
• 3 in 1 Rolls
• Safe Edge
• Closed Double Seam
Please note: Rolls shown in photographs are Double Seam Rolls. All available options are listed above.
| Weight | 204 kg |
|---|
Optional Auxiliary Rolls for 20swg Rollformer (RF20)
| SPECIFICATIONS |
|
| 20swg Rolls Inside Diameter: | 3/4″ |
| SPECIFICATIONS – DOUBLE SEAM (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 22swg (0.8mm) Mild Steel |
| Approximate Material Used: | 20mm |
| Seam Width: | 10mm |
| SPECIFICATIONS – DRIVE CLEAT (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 20swg (1.0mm) Mild Steel |
| Approximate Material Used: | 54mm |
| Seam Width: | 29mm |
| SPECIFICATIONS – RIGHT ANGLE FLANGE (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 20swg (1.0mm) Mild Steel |
| Approximate Material Used: | 6.0mm |
| Flange Height: | 6.0mm |
Optional Auxiliary Rolls for 16swg/18swg Rollformer (RF16/RF18)
| SPECIFICATIONS |
|
| 16swg/18swg Rolls Inside Diameter: | 7/8″ |
| SPECIFICATIONS – SMALL PITTSBURGH (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 22swg (0.8mm) Mild Steel |
| Approximate Material Used: | 25mm |
| Seam Width: | 10mm |
| Pocket Width: | 8.5mm |
| SPECIFICATIONS – DOUBLE SEAM (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 18swg (1.2mm) Mild Steel |
| Approximate Material Used: | 32mm |
| Seam Width: | 13mm |
| SPECIFICATIONS – DRIVE CLEAT (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 20swg (1.0mm) Mild Steel |
| Approximate Material Used: | 54mm |
| Seam Width: | 29mm |
| SPECIFICATIONS – PLAIN SEAM (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 20swg (1.0mm) Mild Steel |
| Approximate Material Used: | 11mm |
| Seam Width: | 10mm |
| SPECIFICATIONS – RIGHT ANGLE FLANGE (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 16swg (1.6mm) Mild Steel |
| Approximate Material Used: | 11mm |
| Flange Height: | 12mm |
| SPECIFICATIONS – STANDING SEAM (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 22swg (0.8mm) Mild Steel |
| Approximate Material Used: | 54mm |
| Seam Height: | 19mm |
| SPECIFICATIONS – 3 in 1 (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 22swg (0.8mm) Mild Steel |
| Approximate Material Used: | – |
| Seam Height: | 15mm |
| SPECIFICATIONS – SAFE EDGE (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 22swg (0.8mm) Mild Steel |
| Approximate Material Used: | 9.0mm |
| Seam Width: | 8.0mm |
| SPECIFICATIONS – CLOSED DOUBLE SEAM (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 18swg (1.2mm) Mild Steel |
| Approximate Material Used: | 32mm |
| Seam Width: | 13mm |
Optional Auxiliary Rolls for 18swg Rollformer (RF18)
| SPECIFICATIONS |
|
| 18swg Rolls Inside Diameter: | 7/8″ |
| SPECIFICATIONS – SMALL PITTSBURGH (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 22swg (0.8mm) Mild Steel |
| Approximate Material Used: | 25mm |
| Seam Width: | 10mm |
| Pocket Width: | 8.5mm |
| SPECIFICATIONS – DOUBLE SEAM (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 18swg (1.2mm) Mild Steel |
| Approximate Material Used: | 32mm |
| Seam Width: | 13mm |
| SPECIFICATIONS – DRIVE CLEAT (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 20swg (1.0mm) Mild Steel |
| Approximate Material Used: | 54mm |
| Seam Width: | 29mm |
| SPECIFICATIONS – PLAIN SEAM (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 20swg (1.0mm) Mild Steel |
| Approximate Material Used: | 11mm |
| Seam Width: | 10mm |
| SPECIFICATIONS – RIGHT ANGLE FLANGE (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 18swg (1.2mm) Mild Steel |
| Approximate Material Used: | 11mm |
| Flange Height: | – |
| SPECIFICATIONS – STANDING SEAM (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 22swg (0.8mm) Mild Steel |
| Approximate Material Used: | 54mm |
| Seam Height: | – |
| SPECIFICATIONS – 3 in 1 (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 22swg (0.8mm) Mild Steel |
| Approximate Material Used: | – |
| Seam Height: | – |
| SPECIFICATIONS – SAFE EDGE (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 22swg (0.8mm) Mild Steel |
| Approximate Material Used: | – |
| Seam Width: | 8.0mm |
| SPECIFICATIONS – CLOSED DOUBLE SEAM (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 18swg (1.2mm) Mild Steel |
| Approximate Material Used: | 32mm |
| Seam Width: | 13mm |
All capacities are based on the use of rollforming quality mild steel unless otherwise stated. All specifications, dimensions & weights are approximate & are to be used as a guide. Colours may vary. Please note photographs/drawings are not to scale. All prices are subject to delivery costs and applicable VAT. W. Neal Services Ltd reserves the right to alter any specifications. *For warranty terms please see our full Terms & Conditions. E&OE.
All specifications, dimensions & weights are approximate & are to be used as a guide. Colours may vary. Please note photographs/drawings are not to scale. All prices are subject to delivery costs and applicable VAT. W. Neal Services Ltd reserves the right to alter any specifications. *For warranty terms please see our full Terms & Conditions. E&OE
If you’re not sure this machine will do the job you need it for or you simply have questions about it, we can help. Call or email us using the buttons below:
Give us a call today and we can help get you the machine you need.
Give us a call today and we can help get you the machine you need.
