If you’re not sure this machine will do the job you need it for or you simply have questions about it, we can help. Call or email us using the buttons below:
Manufactured by W. NEAL SERVICES LTD
WNS 20swg (1.0mm) PITTSBURGH LOCK COMPACT ROLLFORMERS are 5 station machines. They are principally used in the HVAC industry for joining sheet metal at right angles on straight and curved duct sections. Pittsburgh Lock Rolls, auxiliary shafts and an autoguide flanging attachment are fitted as standard. The ‘lock’ is formed in one pass and a flange is inserted into the pocket. The edge is then hammered over either manually or with a WNS PITTSBURGH LOCK SEAM CLOSER / LOCKER (SC10) & (SC12) or with a WNS 18swg (1.2mm) PITTSBURGH LOCK AIR CLOSING HAMMER (AH18). Additional forming rolls, such as double seam rolls, drive cleat rolls, etc. can be fitted onto the auxiliary shafts. The autoguide flanging attachment enables the forming of a right angle on curved, straight and irregular shapes.
WNS Rollformers are manufactured with all steel side plates. The shafts, forming rolls, gears and guide fences are all hardened, and needle bearings are fitted throughout. This COMPACT model is ideal for use on site as it can be transported easily in the boot of a car or small van.
Additional Auxiliary Rolls Available:
• Double Seam Rolls
• Drive Cleat Rolls
• Right Angle Flange Rolls
| Weight | 250 kg |
|---|---|
| Dimensions | 84 × 35 × 50 cm |
| SPECIFICATIONS – GENERAL | |
| Model: | CRF20 |
| Stations: | 5 (with Auxiliary Shafts) |
| Maximum Thickness: | 20swg (1.0mm) Mild Steel |
| Speed: | 7.0m/min |
| Motor Power: | 1HP, 0.75kW |
| Supply Voltage: | 415v, 3 Phase |
| Dimensions – machine (apx): | 840mm x 350mm x 465mm (l x w x h) |
| Dimensions – packing (apx): | TBA |
| Weights – net/gross (apx): |
80Kg/100Kg |
| SPECIFICATIONS – PITTSBURGH (Fitted as Standard) |
|
| Maximum Thickness: | 0.5mm – 1.0mm (26swg – 20wg) Mild Steel |
| Approximate Material Used: | 25mm – subject to knock over edge |
| Seam Width: | 10mm |
| SPECIFICATIONS – AUTOGUIDE FLANGING ATTACHMENT (Fitted as Standard) |
|
| Maximum Thickness: | 20swg (1.0mm) Mild Steel |
| Minimum Corner Radius: | 50mm |
| Flanging Attachment Direction: | Left to Right |
| SPECIFICATIONS – DOUBLE SEAM (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 22swg (0.8mm) Mild Steel |
| Approximate Material Used: | 20mm |
| Seam Width: | 10mm |
| SPECIFICATIONS – DRIVE CLEAT (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 20swg (1.0mm) Mild Steel |
| Approximate Material Used: | 54mm |
| Seam Width: | 29mm |
| SPECIFICATIONS – RIGHT ANGLE FLANGE (Optional Auxiliary Rolls) |
|
| Maximum Thickness: | 20swg (1.0mm) Mild Steel |
| Approximate Material Used: | 6.0mm+ |
| Seam Width: | 6.0mm |
All capacities are based on the use of rollforming quality mild steel unless otherwise stated. All specifications, dimensions & weights are approximate & are to be used as a guide. Colours may vary. Please note photographs/drawings are not to scale. All prices are subject to delivery costs and applicable VAT. W. Neal Services Ltd reserves the right to alter any specifications. *For warranty terms please see our full Terms & Conditions. E&OE.
If you’re not sure this machine will do the job you need it for or you simply have questions about it, we can help. Call or email us using the buttons below:
Give us a call today and we can help get you the machine you need.
Give us a call today and we can help get you the machine you need.
