used-wns-20swg-rollformer-fa-ds-ref309-now-sold

used-wns-20swg-rollformer-fa-ds-ref309-d1

Description

Used/Reconditioned.
WNS 20swg (1.0mm) PITTSBURGH LOCK ROLLFORMER is principally used for joining sheet metal at right angles on straight and curved duct sections. This machine comes complete with Pittsburgh Lock Rolls, Double Seam Rolls and Flanging Attachment. This machine has 415v, 3 phase electrics. (Ref:309)

This machine is now sold.

W. NEAL SERVICES LTD – Manufacturing Rollforming Machinery for over 30 years.

Rollformers create a ‘lock’ which is formed in one pass and a flange is inserted into the pocket. The edge is then hammered over either manually or with a WNS PITTSBURGH LOCK SEAM CLOSER / LOCKER (SC10) & (SC12) or with a WNS 18swg (1.2mm) PITTSBURGH LOCK AIR CLOSING HAMMER (AH18). Additional forming rolls, such as double seam rolls, drive cleat rolls, etc. can be fitted onto the auxiliary shafts. The flanging attachment enables a right angle to be formed on curved, straight and irregular shapes. The attachment is fitted with a tilting head to enable complete circles to be formed.

WNS Rollformers are manufactured with all steel side plates. The shafts, forming rolls, gears and guide fences are all hardened, and needle bearings are fitted throughout.

Additional Auxiliary Rolls Available:
• Drive Cleat Rolls
• Right Angle Flange Rolls

View Literature

Additional information

Weight	1000 kg

SPECIFICATIONS – GENERAL
Model:	Ref: 309
Stations:	5 (with Auxiliary Shafts)
Maximum Thickness:	20swg (1.0mm) Mild Steel
Speed:	7.0m/min
Motor Power:	1HP, 0.75kW
Supply Voltage:	415v, 3 Phase
Dimensions – machine (apx):	1067mm x 508mm x 1067mm (l x w x h)
Weights – net/gross (apx):	125Kg/180Kg

SPECIFICATIONS – PITTSBURGH LOCK ROLLS
Maximum Thickness:	0.5mm – 1.0mm (26swg – 20wg) Mild Steel
Approximate Material Used:	25mm – subject to knock over edge
Seam Width:	10mm

SPECIFICATIONS – DOUBLE SEAM ROLLS
Maximum Thickness:	22swg (0.8mm) Mild Steel
Approximate Material Used:	20mm
Seam Width:	10mm

SPECIFICATIONS – FLANGING ATTACHMENT
Maximum Thickness:	20swg (1.0mm) Mild Steel
Minimum Corner Radius:	50mm
Flanging Attachment Direction:	Left to Right

All capacities are based on the use of Rollforming quality Mild Steel unless otherwise stated. All specifications, dimensions & weights are approximate & are to be used as a guide. Colours may vary. Please note photographs/drawings are not to scale. All prices are subject to delivery costs and applicable VAT. W. Neal Services Ltd reserves the right to alter any specifications. *For warranty terms please see our full Terms & Conditions. E&OE.