If you’re not sure this machine will do the job you need it for or you simply have questions about it, we can help. Call or email us using the buttons below:
*please see Terms & Conditions. **fees apply.
WNS 20swg (1.0mm) PITTSBURGH LOCK ROLLFORMER (REF: 401) is a 5-station machine and is principally used in the HVAC industry for joining sheet metal at right angles on straight and curved duct sections. This machine is complete with Pittsburgh lock rolls, NEW WNS flanging attachment and double seam rolls. This machine has 415v, 3 phase electrics.
The ‘lock’ is formed in one pass and a flange is inserted into the pocket. The edge is then hammered over either manually or with a WNS PITTSBURGH LOCK SEAM CLOSER / LOCKER (SC10), (SC12) or alternatively with a WNS 18swg (1.2mm) PITTSBURGH LOCK AIR CLOSING HAMMER (AH18). Additional forming rolls, such as double seam rolls, drive cleat rolls, etc. can be fitted onto the auxiliary shafts. The autoguide flanging attachment enables the forming of a right angle on curved, straight and irregular shapes.
WNS rollformers are manufactured with all steel side plates. The shafts, forming rolls, gears and guide fences are all hardened, and needle bearings are fitted throughout.
Additional Auxiliary Rolls Compatible & Available:
• Double Seam
• Drive Cleat
• Right Angle Flange
USED/RECONDITIONED
This is a used machine and is in full working order.
Viewing welcome prior to purchase.
Delivery can be arranged (fees apply).
To view all our available Rollformers, please click here.
Â
| SPECIFICATIONS – GENERAL | |
| Model: | REF: 401 |
| Stations: | 5 (with Auxiliary Shafts) |
| Maximum Thickness: | 20swg (1.0mm) Capacity Mild Steel |
| Supply Voltage: | 415v, 3 Phase Electrics |
| Dimensions – machine (apx): | 1070mm x 510mm x 1070mm (l x w x h) |
| Weight – Net (apx): | 185Kg |
| SPECIFICATIONS – PITTSBURGH LOCK ROLLS (FITTED AS STANDARD) |
|
| Maximum Thickness: | 20swg (1.0mm) Mild Steel |
| Approximate Material Used: | 25mm – subject to knock over edge |
| Seam Width: | 10mm |
| Pocket Depth: | 8.5mm |
| SPECIFICATIONS –Â AUTOGUIDE FLANGING ATTACHMENT |
|
| Maximum Thickness: | Â 20swg (1.0mm) Mild Steel |
| Minimum Radius: | Â 100mm |
| Approximate Material Used: | 6.0mm |
| Fkange Height: | 6.0mm |
| Flanging Attachment Direction: | Â Left to Right |
| SPECIFICATIONS –Â DOUBLE SEAM ROLLS |
|
| Maximum Thickness: | Â 22swg (0.8mm) Mild Steel |
| Approximate Material Used: | Â 20mm |
| Seam Width: | Â 10mm |
All capacities are based on the use of rollforming quality mild steel unless otherwise stated. All specifications, dimensions and weights are approximate and are to be used as a guide. Colours may vary. Please note photographs/drawings are not to scale. All prices are subject to delivery costs and applicable VAT.
W. Neal Services Ltd reserves the right to alter any specifications. For warranty terms please see our full Terms & Conditions. E&OE.
If you’re not sure this machine will do the job you need it for or you simply have questions about it, we can help. Call or email us using the buttons below:
Give us a call today and we can help get you the machine you need.
Give us a call today and we can help get you the machine you need.
