£800.00 – £975.00
If you’re not sure this machine will do the job you need it for or you simply have questions about it, we can help. Call or email us using the buttons below:
*fees apply.
W. NEAL SERVICES LTD – Manufacturing Rollforming Machinery since 1981.
WNS forming rolls are suitable for use with most brands of rollformers (Lockformer, Oliver, Shorte, Haigh, CMZ, Morgan Rushworth etc) and held in stock.
These rolls are suitable for use with most imperial size rollformers, with a recommended shim size of 0.0080
Additional Auxiliary Rolls Available:
• Small Pittsburgh Lock (APL)
• Drive Cleat
• Double Seam
• Plain Seam
• Right Angle Flange
• Standing Seam
• 3 in 1 Rolls
• Safe Edge
• Closed Double Seam
Please note: Auxiliary rolls shown in photographs are double seam rolls. All available options are listed above.
| Weight | 204 kg |
|---|
| 16swg/18swg AUXILIARY ROLLS SPECIFICATIONS |
|
| Rolls – Inside Diameter: | 7/8″ |
| SMALL PITTSBURGH LOCK ROLLS (APL) SPECIFICATIONS |
|
| Maximum Thickness: | 22swg (0.8mm) Mild Steel |
| Approximate Material Used: | 25mm |
| Seam Width: | 10mm |
| Pocket Width: | 8.5mm |
| DRIVE CLEAT ROLLS SPECIFICATIONS |
|
| Maximum Thickness: | 20swg (1.0mm) Mild Steel |
| Approximate Material Used: | 54mm |
| Seam Width: | 29mm |
| DOUBLE SEAM ROLLS SPECIFICATIONS |
|
| Maximum Thickness: | 18swg (1.2mm) Mild Steel |
| Approximate Material Used: | 21mm |
| Seam Width: | 11mm |
| PLAIN SEAM ROLLS SPECIFICATIONS |
|
| Maximum Thickness: | 20swg (1.0mm) Mild Steel |
| Approximate Material Used: | 11mm |
| Seam Width: | 10mm |
| RIGHT ANGLE FLANGE ROLLS SPECIFICATIONS |
|
| Maximum Thickness: | 16swg (1.6mm) Mild Steel |
| Approximate Material Used: | 11mm |
| Flange Height: | 12mm Maximum |
| STANDING SEAM ROLLS SPECIFICATIONS |
|
| Maximum Thickness: | 22swg (0.8mm) Mild Steel |
| Approximate Material Used: | 54mm |
| Seam Height: | 19mm |
| 3 in 1 ROLLS SPECIFICATIONS |
|
| Maximum Thickness: | 22swg (0.8mm) Mild Steel |
| Approximate Material Used: | – |
| Seam Height: | 15mm |
| SAFE EDGE ROLLS SPECIFICATIONS |
|
| Maximum Thickness: | 22swg (0.8mm) Mild Steel |
| Approximate Material Used: | 9.0mm |
| Seam Width: | 8.0mm |
| CLOSED DOUBLE SEAM ROLLS SPECIFICATIONS |
|
| Maximum Thickness: | 18swg (1.2mm) Mild Steel |
| Approximate Material Used: | 21mm |
| Seam Width: | 11mm |
| 20swg AUXILIARY ROLLS SPECIFICATIONS |
|
| Rolls – Inside Diameter: | 3/4″ |
| DRIVE CLEAT ROLLS SPECIFICATIONS |
|
| Maximum Thickness: | 20swg (1.0mm) Mild Steel |
| Approximate Material Used: | 54mm |
| Seam Width: | 29mm |
| DOUBLE SEAM ROLLS SPECIFICATIONS |
|
| Maximum Thickness: | 22swg (0.8mm) Mild Steel |
| Approximate Material Used: | 20mm |
| Seam Width: | 10mm |
| RIGHT ANGLE FLANGE ROLLS SPECIFICATIONS |
|
| Maximum Thickness: | 20swg (1.0mm) Mild Steel |
| Approximate Material Used: | 6.0mm |
| Flange Height: | 6.0mm |
*fees apply.
All capacities are based on the use of rollforming quality mild steel unless otherwise stated. All specifications, dimensions and weights are approximate and are to be used as a guide. Colours may vary. Please note photographs/drawings are not to scale. All prices are subject to delivery costs and applicable VAT.
W. Neal Services Ltd reserves the right to alter any specifications. For warranty terms please see our full Terms & Conditions. E&OE.
If you’re not sure this machine will do the job you need it for or you simply have questions about it, we can help. Call or email us using the buttons below:
Give us a call today and we can help get you the machine you need.
Give us a call today and we can help get you the machine you need.
